DB50 Male To (16) 3pin XLR Females (GPI/Tally Out) Breakout Cable. Works With Tally Portion Of Our SA&J Intercom/Tally CCU Cables (if your CCU supports this type of tally circuit).
Works With:
- Panasonic AV-HS450 (AV-HS450N, AV-HS450E, AVHS450, AVHS450N, AVHS450E)
Note: On the AVHS450 series the DB50 Female Connector is located on the rack mounted switcher control unit. For a tally cable that connects to back of the actual switcher use this cable)
Note: The AVHS450 series uses voltage (not closed contact) to activate/deactivate tally
Works with Tally portion of our SA&J CCU Tally/Intercom Cables
These cables are made in-house and are made upon order. Custom lengths and/or custom XLR genders available.
Please note that not all CCU's, tally systems and intercom systems are compatible, so please refer to your system's specifications for more information on capabilities, configuration and use.
Ensure that the menu settings on your switcher and on the camera CCU are set properly and that the tally circuits are compatible.
Tally XLR wiring: Tally XLR's are wired Pin2: Tally-X (hot), Pin3: Tally-Y (cold). The normal procedure to turn on a Tally light would be to short XLR pins 2 & 3 which completes (closes) the circuit and therefore turns on the Tally (some units may differ, refer to your units service manual for complete information).
